b3ta.com board
You are not logged in. Login or Signup
Home » Messageboard » Message 1241265 (Thread)

# but that won't tell you much
engineers don't write well, so the person who wrote it didn't put half of what you needed to know into the manual...
(I helped save b3ta! kitty meow meow, Wed 21 May 2003, 23:58, archived)
# Being a Haynes, it would go like this.....
Remove cover plate screws. Remove cover plate.

TURN PAGE

Make sure that you marked position of cover plate before removal. WARNING - Large spring under compression behind cover plate.

cunts
(I helped save b3ta! Ravenblack All the good quotes have gone, Thu 22 May 2003, 0:01, archived)
# You forgot the bit
that says "Now replace [key component] using [tool you have no chance of having or buying].
(I helped save b3ta! Uncle Joe, Thu 22 May 2003, 0:11, archived)
# Or.....
Locate bolt 'A' situated on flange...


What flange? Mine doesn't have one....and I'm having a bastard time trying to find washer 'C' situated somewhere on workshop floor.....
(I helped save b3ta! Ravenblack All the good quotes have gone, Thu 22 May 2003, 0:15, archived)