You are not logged in. Login or Signup
Home » Messageboard » XXX » Message 10287019 (Thread)

# I may.
At the time I had a lot of other shit going on around the house, so setting up the saw in my kitchen sink and sitting at it for a couple of hours usually meant telling others to leave me alone and stop bugging me as I worked, that I would get it out of the way so we could make dinner but then it was going right back there. There was much bitching.

But aside from that... I marked the glass with a Sharpie marker, which then had the annoying habit of somehow lifting off in pieces as I worked and floating away. I kid you not, the vibration from the saw and the flow of water resulted in it lifting off of there intact and gliding across the glass! The only way around that turned out to be to use a carbide tip scribe to scratch the shape into the glass and then trace it with the Sharpie so that some of the ink stayed in the scratches.

Then foiling it along the small curves and inside angles involved a lot of patience and patching together tears with little bits of cut foil, which was tedious. On the pic of the screen there is an elaborate green glass leaf on the right that severely tested my patience.

But I may do more of it anyway...
(, Fri 17 Dec 2010, 20:09, archived)
# Well I'm impressed with the pen markings being able to move. I didn't expect that from sharpie.
Nicely done in the solution though. As long as you've solved the issue now there'll be less time to correct it in the future. And make us all new windows. Anyway if you do show us the results. I love glass me, but I don't have the patience for it all the time.
(, Fri 17 Dec 2010, 20:32, archived)