

The table is one I bought from an unfinished furniture place. which had a lower shelf on it. I used a router table to cut grooves in the underside of the top and the top of the shelf and along the insides of the legs to set the glass. Inside is a compact fluorescent bulb, the equivalent of a 40 watt incandescent, so it takes very little power to run and produces no heat, and should last about forever.
Next step: find a local buyer for this sucker.
It actually wasn't that difficult to do- the worst part was cutting that bastard glass. See where it changes from one color to the next? In that area of change the glass tends to be weaker as two dissimilar colors with subtly different properties mix, so if you score it and go to break it along that line there's a good chance of it doing a sudden change in direction and breaking where you don't want it to.
I said a lot of very bad words while cutting that glass.
(,
Fri 17 Dec 2010, 19:24,
archived)
I said a lot of very bad words while cutting that glass.
it's always good to be able to curse in more than one language
(,
Fri 17 Dec 2010, 19:26,
archived)
And I frequently use them, too. Only problem is that if you get into the habit you end up using them when out in public, only to have some little old ethnic woman of some sort turn and stare at you aghast.
(,
Fri 17 Dec 2010, 19:44,
archived)
but i know when someone's taking the piss, which is why i swore in russian at 2 sailors who had popped into my parent's* pub. far from being annoyed, they laughed their arses off and bought me vodka all night!
*they don't own it, but they both work there
(,
Fri 17 Dec 2010, 19:48,
archived)
*they don't own it, but they both work there
I meant in the 'it looks shit but people are very polite' sense.
(,
Fri 17 Dec 2010, 19:28,
archived)
You must surely have noticed too, this place is not exactly a charm school. I doubt anyone's being polite for the sake of it.
(,
Fri 17 Dec 2010, 19:30,
archived)
perhaps you would like to post a pic of one of your great creations..Go on ..put us all to shame
(,
Fri 17 Dec 2010, 19:34,
archived)
:if you like something make a comment to show this
:if you don't like something-button it!...dissapproval is frowned upon -unless it's a troll or spammer.........then every cunt can't wait to get stuck in
(,
Fri 17 Dec 2010, 19:40,
archived)
:if you don't like something-button it!...dissapproval is frowned upon -unless it's a troll or spammer.........then every cunt can't wait to get stuck in
That's a fuckload of frownery!
(,
Fri 17 Dec 2010, 19:43,
archived)
Have a nicely-done.
And fluorescent bulbs don't last forever. They last about the same as "proper" bulbs for me.
(,
Fri 17 Dec 2010, 19:24,
archived)
And fluorescent bulbs don't last forever. They last about the same as "proper" bulbs for me.
Here's the last one I did:

I always thought that one looked like lava.
(,
Fri 17 Dec 2010, 19:30,
archived)

I always thought that one looked like lava.
It's actually one large-ish sheet of glass that I bought from a company in Pennsylvania and had shipped. This is one of their high-end types of glass.
I found out later that if I drive up to their factory- about a five and a half hour trip- I can get the same sheet of glass for less than half of what I paid for the bastard thing. So a friend and I are planning a road trip up to get about ten sheets to bring home...
(,
Fri 17 Dec 2010, 19:33,
archived)
I found out later that if I drive up to their factory- about a five and a half hour trip- I can get the same sheet of glass for less than half of what I paid for the bastard thing. So a friend and I are planning a road trip up to get about ten sheets to bring home...
I fear handling glass though. I've seen some nasty accidents.
(,
Fri 17 Dec 2010, 19:39,
archived)
Most of the time I work bare handed, and end up with a nick or two- but I like to have the full tactile sensation as I'm doing something delicate. I sometimes wear those yellow rubber gloves that you wear for doing cleaning, but a fellow who's been doing glasswork for thirty years gave me a great tip: get those little rubber fingertips that you use for counting money, as the main place you get cuts is on your fingertips. They're cheap and comfortable.
(,
Fri 17 Dec 2010, 19:43,
archived)
The really thin condom-like ones are probably not sufficient. They make heavier ones with little knobbly bits all over them for better traction, which are what I will likely get the next time I go out to the office supply store.
(,
Fri 17 Dec 2010, 20:01,
archived)
Rather than post the pics themselves, I'll post a few links to things I already have online:
www.b3tards.com/u/e7686c246c2a45c30e45/christmas_mirror.jpg
www.b3tards.com/u/e7686c246c2a45c30e45/ivy.jpg
www.b3tards.com/u/e7686c246c2a45c30e45/screen.jpg
(,
Fri 17 Dec 2010, 19:36,
archived)
www.b3tards.com/u/e7686c246c2a45c30e45/christmas_mirror.jpg
www.b3tards.com/u/e7686c246c2a45c30e45/ivy.jpg
www.b3tards.com/u/e7686c246c2a45c30e45/screen.jpg
Have done a bit of stained glass myself but nothing quite so good as the ivy. And that bookshelf is cracking
(,
Fri 17 Dec 2010, 19:43,
archived)
(,
Fri 17 Dec 2010, 19:46,
archived)
so that they'd be nice and smooth, then did the copper foil bit to them. With the edges taken down it was surprisingly easy.
(,
Fri 17 Dec 2010, 19:51,
archived)
I cut every one of those leaves using a diamond grit bandsaw. Similarly, the one with the stone slices and leaves was done with the saw. The problem is that each leaf takes quite a bit of time to do, and foiling those inside corners is a bugger and a half as the foil tape tears and has to be patched.
I swore I would never do something that intricate again, but I have the feeling that I'll break that vow eventually...
(,
Fri 17 Dec 2010, 19:48,
archived)
I swore I would never do something that intricate again, but I have the feeling that I'll break that vow eventually...
At the time I had a lot of other shit going on around the house, so setting up the saw in my kitchen sink and sitting at it for a couple of hours usually meant telling others to leave me alone and stop bugging me as I worked, that I would get it out of the way so we could make dinner but then it was going right back there. There was much bitching.
But aside from that... I marked the glass with a Sharpie marker, which then had the annoying habit of somehow lifting off in pieces as I worked and floating away. I kid you not, the vibration from the saw and the flow of water resulted in it lifting off of there intact and gliding across the glass! The only way around that turned out to be to use a carbide tip scribe to scratch the shape into the glass and then trace it with the Sharpie so that some of the ink stayed in the scratches.
Then foiling it along the small curves and inside angles involved a lot of patience and patching together tears with little bits of cut foil, which was tedious. On the pic of the screen there is an elaborate green glass leaf on the right that severely tested my patience.
But I may do more of it anyway...
(,
Fri 17 Dec 2010, 20:09,
archived)
But aside from that... I marked the glass with a Sharpie marker, which then had the annoying habit of somehow lifting off in pieces as I worked and floating away. I kid you not, the vibration from the saw and the flow of water resulted in it lifting off of there intact and gliding across the glass! The only way around that turned out to be to use a carbide tip scribe to scratch the shape into the glass and then trace it with the Sharpie so that some of the ink stayed in the scratches.
Then foiling it along the small curves and inside angles involved a lot of patience and patching together tears with little bits of cut foil, which was tedious. On the pic of the screen there is an elaborate green glass leaf on the right that severely tested my patience.
But I may do more of it anyway...
Nicely done in the solution though. As long as you've solved the issue now there'll be less time to correct it in the future. And make us all new windows. Anyway if you do show us the results. I love glass me, but I don't have the patience for it all the time.
(,
Fri 17 Dec 2010, 20:32,
archived)
That's actually a privacy screen on my bedroom window, so I can have the windows and curtains open in summer without showing my neighbors more than they'd like to see.
(,
Fri 17 Dec 2010, 19:50,
archived)
i just let them see. after the first time, believe me, they stop looking!
(,
Fri 17 Dec 2010, 19:53,
archived)
Aside from being arrested for indecent exposure, I'd rather not scar their little psyches by having them see my wobbly bits.
(,
Fri 17 Dec 2010, 20:11,
archived)
She's told me that when we move from here we are definitely taking them with us. I suspect that I'm going to be silently cursing that, as to re-mount them on a different window will mean reworking the metal a bit.
(,
Fri 17 Dec 2010, 20:03,
archived)
Just thinking though... what would it look like if you put a light source in there that changed colour, I know you can't put a lava lamp in there because of the heat, but something that would produce that sort of efect
Lovely as it is anyway.. hope you get loads for it.....
(,
Fri 17 Dec 2010, 19:34,
archived)
Lovely as it is anyway.. hope you get loads for it.....
but I think it will sell easier if it stays constant.
My next table will be a bit different in that instead of using such densely colored glass I'll use some old cathedral glass that I already have and put a puck-type light in the top of the table, shining downward. That way daylight can go through it and look pretty, but at night it will softly glow.
The one after that" Probably a mosaic of colors, made from the little scraps of glass I have all over the place as leftovers.
(,
Fri 17 Dec 2010, 19:40,
archived)
My next table will be a bit different in that instead of using such densely colored glass I'll use some old cathedral glass that I already have and put a puck-type light in the top of the table, shining downward. That way daylight can go through it and look pretty, but at night it will softly glow.
The one after that" Probably a mosaic of colors, made from the little scraps of glass I have all over the place as leftovers.
But very expensive, thuse pushing the price up making it more difficult to sell....
Hope you post pics of your next projects for us all to see....
Is it rude to ask how much you get for these and how much you spend on materials?
(,
Fri 17 Dec 2010, 19:49,
archived)
Hope you post pics of your next projects for us all to see....
Is it rude to ask how much you get for these and how much you spend on materials?
The triangular table was an experiment, the first one of these I did. The glass was some that I had bought as part of a bunch of scrap from a hobbyist who was getting rid of her stuff, and the table came from what was essentially a junk pile. Originally it had a thick brown formica top and lower shelf, which I replaced with pine. Between all of the materials I think I spent maybe $50 and got $175 for it after the commission was paid. (The guy spent $300 for it.)
This table has about $200 of materials in it, which means that I have to either sell it for a huge price through the place where I sold the last one (an art gallery) or I have to sell it elsewhere for about $300. The glass was the major expense, as I bought it through a local shop who ordered it for me, and cost $130. The table was about $40, and the light fixture was about another $10 or so. There was also stain and polyurethane used, of course, but that's a tiny cost really.
If I can sell this one for enough to at least break even and pay for some beer, I'll get more glass straight from the factory for $50 a sheet (rather than $130) and bring home a load of it. Then it starts getting to be cost-effective.
(,
Fri 17 Dec 2010, 19:59,
archived)
This table has about $200 of materials in it, which means that I have to either sell it for a huge price through the place where I sold the last one (an art gallery) or I have to sell it elsewhere for about $300. The glass was the major expense, as I bought it through a local shop who ordered it for me, and cost $130. The table was about $40, and the light fixture was about another $10 or so. There was also stain and polyurethane used, of course, but that's a tiny cost really.
If I can sell this one for enough to at least break even and pay for some beer, I'll get more glass straight from the factory for $50 a sheet (rather than $130) and bring home a load of it. Then it starts getting to be cost-effective.
I suspect the main reason for you doing these is the enjoyment of creating something special.....
Hope you make a packet when you sell the next one...
(,
Fri 17 Dec 2010, 20:11,
archived)
Hope you make a packet when you sell the next one...
Yes, overall I've been doing it while unemployed to keep from going mental, but I wouldn't mind making a bit of money off of this. If I go up to get the glass myself, I'll spend probably about $100 in gas and food, plus a cheap motel somewhere. Divided up through ten sheets of glass, that's not too bad.
(,
Fri 17 Dec 2010, 20:14,
archived)



