I must inform youthat neither the driver bits nor the drill bits you need are worth a wank. They are always made of toffee.
Just spend a tenner on a set of tungsten coated bits.
btw, if you are drilling into an internal cavity wall then you don't need the bits or the drill for that matter ;)
(Just spend a tenner on a set of tungsten coated bits.
btw, if you are drilling into an internal cavity wall then you don't need the bits or the drill for that matter ;)
Pasanonic 's been known to cause insanity in laboratory mice,
Fri 7 Nov 2008, 16:10,
archived)
But you might need a machine that goes pingto tell you where the wires are.
(
Bela Lugosi's Dad,
Fri 7 Nov 2008, 16:12,
archived)
well it's quite a heavy mirror.It's pulled a nail and a non-rawplugged screw out thus far, so I'm thinking throw power at it.
( barryheadwound Mul-ti-pass? Multipass!,
Fri 7 Nov 2008, 16:13,
archived)
as I said.depends if you have a cavity or not.
solid brick needs brown plug, 2" 8 screw and a number 7 masonry drill bit.
Plasterboard cavity needs a metal cavity wall fixing, hammer and number 3 philips screwdriver.
(solid brick needs brown plug, 2" 8 screw and a number 7 masonry drill bit.
Plasterboard cavity needs a metal cavity wall fixing, hammer and number 3 philips screwdriver.
Pasanonic 's been known to cause insanity in laboratory mice,
Fri 7 Nov 2008, 16:16,
archived)