and lots of lacqueras the clear coat is what will give you durability.
A coat or 3 of spray paint will just start to flake and chip.
Also the plastic will need to be thoroughly de-greased with an alcohol like ethanol or isopropanol. Then you will most likely need a key coat plastic primer to go on after you have rubbed the whole thing down with a rubber sanding pad.
(A coat or 3 of spray paint will just start to flake and chip.
Also the plastic will need to be thoroughly de-greased with an alcohol like ethanol or isopropanol. Then you will most likely need a key coat plastic primer to go on after you have rubbed the whole thing down with a rubber sanding pad.
Pasanonic 's been known to cause insanity in laboratory mice,
Sun 16 Nov 2008, 16:50,
archived)
doyou do this for a living. Or are just a bigger geek in more areas than me?
(,
Sun 16 Nov 2008, 16:55,
archived)
I was in the building trade commerciallyand an arm of my business was industrial paint spraying of anything from ship hulls to the walls in about 50 M&S branches that were clad in gloss plastic.
( Pasanonic 's been known to cause insanity in laboratory mice,
Sun 16 Nov 2008, 16:59,
archived)