Then each photo will be at the correct lightness levels
(,
Mon 12 Jan 2009, 9:15,
archived)
with the same settings you'll get a dark picture at the sides, over exposed at the sun and normal only on one angle?
(,
Mon 12 Jan 2009, 9:16,
archived)
but if you use auto settings then it will make stitching far harder.
Also you don't normally make a 360º panorama unless that's what you're specfically after and if you are you would take multiple exposure checks first and find the best average if you're really ambitious a HDR 360º by bracketting.
(,
Mon 12 Jan 2009, 9:26,
archived)
Also you don't normally make a 360º panorama unless that's what you're specfically after and if you are you would take multiple exposure checks first and find the best average if you're really ambitious a HDR 360º by bracketting.
but because the camera wasn't absolutely level,the perspectives/barelling were too much to stitch together properly.Some day I might get a tilt-shift lens
(,
Mon 12 Jan 2009, 9:39,
archived)
a lot of people simply mount it on a tripod and pan but the pivot point is therefore directly under the camera and will cause distortion. There are brackets that you can attach to the tripod to ensure the pivot point is directly under the lens and not the camera body.
www.360rage.com/panorama-hardware-item.php?i=9
en.wikipedia.org/wiki/Panoramic_tripod_head
(,
Mon 12 Jan 2009, 9:47,
archived)
www.360rage.com/panorama-hardware-item.php?i=9
en.wikipedia.org/wiki/Panoramic_tripod_head
at @ £100 I think I'll DIY one as its only 3 bits of metal.I had planned to use a spirit level against the lens front the next time, but all this will have to wait for the next summer trip to the lake district
Edit.....The laser level is a great idea, They're sometimes dead cheap in places like Aldi etc
(,
Mon 12 Jan 2009, 10:07,
archived)
Edit.....The laser level is a great idea, They're sometimes dead cheap in places like Aldi etc
www.dcenet.co.uk/malco/360/technical.htm
I'm sooo bookmarking that page
(,
Mon 12 Jan 2009, 10:09,
archived)
I'm sooo bookmarking that page