
Very much after you Claude
( , Thu 17 Oct 2019, 18:04, Reply)

I did a couple of 45s to the get shit off from parties back in the late 70s, and it worked well but getting every last bit of dried glue off can be time consuming. Too much glue and it takes forever to dry, not enough and it doesn't come off cleanly, but it does work.
( , Thu 17 Oct 2019, 19:29, Reply)

PVA glue doesn't adhere to non-porous material, including PVC and other material records are typically made of. It will penetrate the record's groove and trap particles in there, pulling them out when it has set and is removed.
However, it'll do fuck all for wear and damage, which is an inherent property of records.
( , Thu 17 Oct 2019, 19:42, Reply)

Spray on isopropyl alcohol then dry with compressed air would do it.
( , Thu 17 Oct 2019, 20:23, Reply)

That said, pure IPA is generally not recommended for cleaning PVC, as it tends to evaporate too quickly to be an effective cleaning agent, can potentially remove chemical additives (plasticizers, protective coatings), and may adversely react with other chemicals (e.g. acetic acid) and damage the material.
There's also the risk of damaging the record's label by applying liquids to it.
( , Fri 18 Oct 2019, 9:57, Reply)

( , Fri 18 Oct 2019, 16:52, Reply)

Then 8 bar of air then.
Works for removing crude oil.
( , Fri 18 Oct 2019, 20:53, Reply)

They cost a bit initially, but they can make almost dead records come back to life.
The Spin Clean MkII
( , Sat 19 Oct 2019, 13:36, Reply)

As long as you are prepared to commit to it, it does work very well. The downside is that any muck dries back onto the surface, meaning you have to use it every time.
I wouldn't use any proprietary fluids which can leave additional residues - just a mix of isopropyl alcohol and deionised water.
There are arguments that it reduces wear due to a water film lubricating the contact surface, but that's also said to cause distortion.
Sounded fine to me!
snvinyl.co.uk/Analogis-Wet-Type-LENCO-CLEAN-Arm-art-5930
( , Thu 17 Oct 2019, 22:04, Reply)

Stick them in the washing machine at 60 degrees, then dry them over a radiator.
( , Thu 17 Oct 2019, 22:23, Reply)

Might need to send it some of your dick pics to get rid of any moisture.
( , Thu 17 Oct 2019, 22:36, Reply)

have to single file on the way out, there is a microscope for you.
(hope that makes you feel better)
( , Fri 18 Oct 2019, 21:01, Reply)

list of them here - clicky - a friend had one of the VPI ones
( , Thu 17 Oct 2019, 22:25, Reply)

Apparently that works on all sorts of random things.
( , Fri 18 Oct 2019, 2:35, Reply)

and if it doesn't work, you've got yourself a nice woodglue copy of the record that you can play instead
( , Fri 18 Oct 2019, 7:50, Reply)

Stick it through a Keith Monks machine. A few places round the UK have them, was ยฃ5 a shot few years back from memory.
www.vinyldiscovery.com/united-kingdom
( , Sat 19 Oct 2019, 11:39, Reply)

( , Sat 19 Oct 2019, 13:17, Reply)